Red Gold 'Little One'
Red Gold 'Little One'
Outside
Inside
Free Shipping
Free Shipping
Any order whose total value (including NZ GST if applicable) exceeds NZ$449- or equivalent qualifies for Free Shipping (using either standard Courier in NZ or Fedex International Priority outside of New Zealand) which will be automatically applied during the Checkout process.
Learn more
Lifetime Workmanship & Satisfaction Guarantee
Lifetime Workmanship & Satisfaction Guarantee
Jens Hansen offers a return to studio lifetime workmanship guarantee on our jewellery. This means that if in the unlikely event a workmanship defect is ever discovered, we will replace or repair the item. The item needs to be returned to our studio for assessment and repair and the guarantee does not cover wear and tear, accidental or consequential damage.
Ring Sizing
Ring Sizing
Don't know your ring size yet?
No worries! Choose 'I don't know my size' when ordering, and secure your spot in our crafting queue. We'll reach out to you to confirm your size before we start crafting your unique piece.
Measuring your Ring Size
Here in New Zealand, we mainly use the UK letter ring size system, but as long as you know your size in any recognized system then we can make the perfect ring for you. All our precious metal rings are available in every size, because we make each one to order!
When ordering on our site choose your closest size in USA, UK or European standard ring sizes. For in between sizes choose the closest size, add to Cart and put your exact size in the Special Instructions box on the Cart page. Remember you can email us after you place your order if you have any concerns.
Size conversion table (approximate)
mm (inside diameter) |
US size | UK | EU | Japan/China/HK | Switzerland |
16 | 5 1/4 | K | 50 | 9 1/2 | 10 |
16 1/2 | 6 | L-½ | 52 | 11 | 11 3/4 |
17 | 6 1/2 | M-½ | 52 3/4 | 13 | 13 1/4 |
17 1/2 | 7 1/4 | O | 55 | 14 1/2 | 15 |
18 | 7 3/4 | P | 56 1/4 | 15 1/2 | 16 1/4 |
18 1/2 | 8 1/2 | Q-½ | 58 1/4 | 17 | 18 1/4 |
19 | 9 | R-½ | 59 1/2 | 18 | 19 1/2 |
19 1/2 | 9 1/2 | S-½ | 60 3/4 | 19 | 20 3/4 |
20 | 10 1/4 | U | 62 3/4 | 21 | 22 3/4 |
20 1/2 | 10 3/4 | V | 64 | 22 1/2 | 24 |
21 | 11 1/2 | W-½ | 66 | 24 | 26 |
21 1/2 | 12 | X-½ | 67 1/4 | 25 | 27 1/4 |
22 | 12 3/4 | Z½ | 69 | 26 1/2 | 29 |
22 1/2 | 13¼ | Z1 | 70 1/2 | 27 1/2 | 30 1/2 |
23 | 14 | Z3 | 72 1/4 | 29 | 32 1/4 |
23 1/2 | 14½ | Z4 | 73 1/2 | 30 | 33 1/2 |
You don't know your ring size already?
No problem! If you don't already have a ring, a local jeweller will normally measure you for free.
Or, see if you can borrow one that fits perfectly. Then go to www.findmyringsize.com and in just a few seconds you can find out your exact size. Make sure the borrowed ring is about the same width as the ring you are considering choosing, as width can make a difference to fit.
Other Ring Size Systems
We would recommend the Wikipedia Ring Size page if you want to check further.
When is the best time to measure?
The thickness of your fingers vary during the day. We recommend you measure your ring size during the evening, at room temperature (approx. 20ºC/68ºF).
Ring Size Chart
You can also measure an existing ring against our Jens Hansen Ring Size Chart
Note: Please make sure to print it out at 100% scale and check with a ruler that the scale is correct before you use this chart.
Hallmarks
Hallmarks
Red Gold 'Little One'
The 'little One' - a narrower & Lighter Version of the Replica Ring
Red Gold & Smooth Polished
Just like in the films only smaller.
The Jens Hansen Ring that was filmed for The Lord of the Rings™ movies was originally made in 18ct yellow gold. It weighed approximately 17 grams (more than 1/2 oz.), is 2.7mm thick through the band and measures about 7mm tall (just over 1/4 inch) when laid on its side.
This 'little One' measures just over 5mm wide and is about 2mm thick through the band. Making it a perfect Elvish themed wedding band for the smaller hand.
If it is not perfect as is please click the Forge Your Custom Ring button below to use our Ring Builder tool for more options.
Custom Engraving & English-to-Elvish
This ring can be engraved on either or both the inside and outside of the band. Checkout our english-to-elvish translator.
You can have your own engraver or jeweller engrave the ring for you at anytime in the future, or if you would like us to arrange engraving for you when you buy there is a fixed cost of NZ$115- per side engraved.
NB: Our laser engraver can handle any message, pattern, pictures or symbols desired so long as you are using standard fonts, or can provide a two-tone (e.g. Black & White) image file AND there is enough room for your message to fit on the ring. We CANNOT for legal reasons engrave the same elvish script that features on our licensed The One Ring designs. Other messages in elvish or any other language are ok, of course.